Skip to main content

Featured Post

ARB Deluxe Bars Bumper + Warn Zeon Platinum 10-S Installation

All installation is performed over 1 or 2 months period.  I have an open air garage (no garage).  So, all installation need to be done during day time.  Weather also another factor for the long installation span.  The winter has been brutal in our area.  We got snowstorm till mid April. Before installation start, there are a few prep work can be done.  I have done the following task before bumper installation.   Prep winch for installation to the bumper. Bumper pre-prep tasks before installation to the Sequoia.   Winch Prep (Warn Zeon Platinum 10-S) The winch I choose for this installation is Warn Zeon Platinum 10S.  This is a winch rated as 10,000lbs pull capability.  If you are looking for the specification of the winch, you can find it at the following link.   https://www.warn.com/truck/winches/ZEON_10-S_Pltnm.jsp In additional to the winch, you will need the following parts. ...

First oil change

After our camping trip, I finally need to do my first oil change.  The last oil change on the SUV was from the dealer.  I probably put about 7000+ miles before I switched to use my mechanic, that's me. 
I got 2 @ 5 quarts bottles of Mobil 1 0w-20.  I used about 8.5 quarts. 

The sexy 5.7L V8 engine

Mobil 1 OW-20 with toyota OEM Filter

I'm a synthetic person.  Only use Synthetic oil on all my vehicle.


The oil change steps on this Sequoia is a bit harder.  I need to remove the skid plate to get access to the oil filter housing.  This is not the regular oil filter that I mostly used (known as cartridge oil filter).  I need to drain the engine oil from the oil filter housing.  Then, I need to remove the filter canister and replaced with OEM Toyota filter element.  In additional, I need to replace the rubber o'rings on the canister and drain plug. 
I only use OEM filter.  From eBay, you can purchase a full box of 10 filters for short change.  All filters come with all the hardware required.  In additional, I need to purchase a oil filter socket.  Toyota used a special oil filter canister with special notch socket. I brought my socket from eBay. 
From all the steps, the oil change will take about 1 - 1.5 hrs.  I usually let it drain a little longer to ensure all dirty oil removed from the engine. 

Oil Filter Wrench

Oil Filter Wrench

As usual, after oil change, I powered wash and clean the engine bay.  The engine bay is dusty from the 5000 miles camping trip.  I also powered washed the car undercarriage.  

Comments

Popular Posts