Skip to main content

Featured Post

ARB Deluxe Bars Bumper + Warn Zeon Platinum 10-S Installation

All installation is performed over 1 or 2 months period.  I have an open air garage (no garage).  So, all installation need to be done during day time.  Weather also another factor for the long installation span.  The winter has been brutal in our area.  We got snowstorm till mid April. Before installation start, there are a few prep work can be done.  I have done the following task before bumper installation.   Prep winch for installation to the bumper. Bumper pre-prep tasks before installation to the Sequoia.   Winch Prep (Warn Zeon Platinum 10-S) The winch I choose for this installation is Warn Zeon Platinum 10S.  This is a winch rated as 10,000lbs pull capability.  If you are looking for the specification of the winch, you can find it at the following link.   https://www.warn.com/truck/winches/ZEON_10-S_Pltnm.jsp In additional to the winch, you will need the following parts. ...
Post a Comment
Read more

Sequoia Suspension upgrade - Timbren TTORSEQ1

After the last camping trip, the Sequoia tire thread wear is very uneven.  My pop-up is not really too heavy, but it's seem to sag the rear suspension a little too much.  I'm planning to purchase the following parts and hope to remediate the tire thread wear problem.  



This part is Timbren Rear Suspension Enhancement System TTORSEQ1

I'm hoping to get this problem resolved for our 2017 camping trip.  For now, the truck runs fine, just need a set of tires before the next camping trip.  

In additional to this upgrade, I will be replacing all strut and absorber shock with Bilstien 5100.  This will be my project before the winter.  


Comments

  1. UnknownJune 22, 2017 at 5:36 PM

    did you get the timbrens installed? did they help? what about the shocks? i am thinking of doing the same.

    ReplyDelete

Post a Comment

Popular Posts