Skip to main content

Featured Post

ARB Deluxe Bars Bumper + Warn Zeon Platinum 10-S Installation

All installation is performed over 1 or 2 months period.  I have an open air garage (no garage).  So, all installation need to be done during day time.  Weather also another factor for the long installation span.  The winter has been brutal in our area.  We got snowstorm till mid April. Before installation start, there are a few prep work can be done.  I have done the following task before bumper installation.   Prep winch for installation to the bumper. Bumper pre-prep tasks before installation to the Sequoia.   Winch Prep (Warn Zeon Platinum 10-S) The winch I choose for this installation is Warn Zeon Platinum 10S.  This is a winch rated as 10,000lbs pull capability.  If you are looking for the specification of the winch, you can find it at the following link.   https://www.warn.com/truck/winches/ZEON_10-S_Pltnm.jsp In additional to the winch, you will need the following parts. ...
Post a Comment
Read more

Enabling fog light with parking light and high beam

Are you getting tired of fog light no turning on when you turn on parking light?  Are you getting tired of fog light get cut off during high beam?  I found a mod which cost less than $5.

There is a way to turn on fog light when you are turning on parking light or on high beam.  Here is a diagram show you how to bypass the circuit.



You need need the following parts.  These parts cost less than $5 or maybe free if you previously purchase some.  This is a very common electrical part.



To bypass the fog light relay, you need to cut 2 wires and connect these 2 wires together.  Using the above parts, you will be able to switch back to OEM if needed.  If you don't need to switch back, just cut the 2 wires and connect the 2 wires together.

The following solution will enable your Fog Lights to be “On” any time the main.  light switch is “On” in any position as follows.Turn Parking Lights “On”,


  • Turn Fog Switch “On”, Fog Lights Turn “On” (NEW Function!!!)
  • Turn Head lights “On”, turn Fog Switch “On”, Fog Lights Turn “On” (Same as Factory Setting)
  • Parking and/or Headlights “Off”, turn Fog Switch “On”, Fog Lights “Off”(Same as Factory Setting)
    •  If the Main Light Switch is “Off”, the Fog Light WILL NOT work in this design.
  • Turn High Beam Lights “On”, Turn Fog Switch “On”, Fog Lights Turn “On” (NEW Function!!!)

Comments

Post a Comment

Popular Posts